Imgessel is giving manufacture and mechanical design services of flare stack tips required as new or substitution of the current harmed flare tips. Imgessel demonstrating services for surface arrangement , Installation, Curing and drying out .
Imgessel is working in design drafting, fabrication and installation of guy wired, Derrick Supported and free standing stacks. Imgessel is giving services for flare stack tips required as new or substitution of the current harmed flare tips. Imgessel demonstrating serivces for surface arrangement, Installation, Curing and drying out .
Imgessel has designed guy wired, Derrick Supported Stacks and detached stacks up to 6 m dia and length of 100 m.
DESIGN CODES:
Comprehensive Codes | Stress Codes | Along Wind | Across Wind | Fatigue | Seismic |
ASME STS-1 (US Code) | ASME STS-1 | ASCE 7-05/10 | ASME STS-1 | CICIND | IBC 2006 |
IS 6533 (Indian) | IS 6533 | IS 875 | IS 6533 | AISC 360-05 | IS 875 |
CICIND (Int’l) | CICIND | CICIND | CICIND | UBC-97 | |
AISC 360-05 | NBC | NBC | Manual G | ||
EN1991-1-4 | EN1991-1-4 | ||||
BS CP 3 Ch. V | BS 4076 | ||||
BS 6399 | |||||
UBC-97 |
DESIGN CAPABILITIES
3D
P-Delta Analysis
Guy Wire Design
Lifting Analysis of Stack
Calculation of Frequency for Higher Modes
Stack Vibration Dampers
Self Supported Steel Stacks
Imgessel has designed many different types of self supported stacks, ranging in height from 6 m (20ft) to 100 m (328 ft.). Some special design considerations have included:
- Single Piece Lift of Stack
- Special Breech Openings
- Low Temperature
Applications:
- “Piggy Back” Stacks
- Vibration Design
- Retrofit of Existing Stacks
Customizable Load Combinations
P-Delta Analysis
Guy Wire Design
Lifting Analysis of Stack
Calculate Frequency for Higher Modes
Stack Vibration Dampers
Self Supported Steel Stacks
Imgessel has designed many different types of self supported stacks, ranging in height from 6 m (20ft) to 100 m (328 ft.). Some special design considerations have included:
- Single Piece Lift of Stack
- Special Breech Openings
- Low Temperature
Applications:
- “Piggy Back” Stacks
- Vibration Design
- Retrofit of Existing Stacks